Jump to content
Mechanical Engineering

Production & Manufacturing Technologies


Albums

  1. Proportional Valve Updated

    Applications of   proportional valve for water :
    Flow Control:   Proportional control valves can be used directly for flow control.
    Burner/Flame Control:   The ratio of combustion gas to oxidant gas (such as air or oxygen) is controlled in the burner control system.
    Hot and cold water mixing:   The temperature sensor measures the temperature of the mixed water. And bring this temperature to a given reference value by controlling two solenoid control valves.
    Temperature Control:   A proportional valve for water can set the cold water supply to the heat exchanger based on the measured process water temperature. If higher than the reference, more cold water is required, and lower than the reference, less cooling is required.
    Actuator Control:   Two proportional solenoid valves can control pneumatically actuated air (piston valve, cylinder, etc.). The controller determines which of the two valves must open.
    Injector/Pressure Control:   Solenoid control valve can control the flow rate of propellant gas. The controller sets the valve according to the vacuum pressure.
    Huade Hydraulic Technology Co., Ltd.
    Album created by by
    Huade Hydraulic Technology Co., Ltd. Updated
    • 1
    • 0
    • 0
    • 1 image
    • 0 comments
    • 0 image comments
  2. Hydraulic Control Check Valve Supplier Updated

    Pressure control check valves can be found in every pneumatic and hydraulic system. They assist in a variety of functions, from maintaining system pressure below desired limits, to maintaining set pressure levels in partial circuits. Different types of pressure control check valves include relief valves, pressure reducing valves, sequence valves, balance valves, safety valves and unloading valves.
     
    Pressure Relief Valve:   Limits the maximum pressure in the system by diverting excess gas when the pressure is too high.
    Sequence Valves:   Sequence valves are normally closed two-way valves that regulate the order in which various functions in the circuit occur.
    Pressure Reducing Valve:   A pressure relief valve is usually a two-way valve that opens and closes when sufficient downstream pressure is applied.
    Balance valve:   To balance weight, used to maintain set pressure in one part of the circuit.
    As a leading pressure control check valves supplier,   Huade   provides various check valves,   pressure valve   and   flow valves   for sale. Please feel free to select your interested products and   contact us   for detailed information!
    Huade Hydraulic Technology Co., Ltd.
    Album created by by
    Huade Hydraulic Technology Co., Ltd. Updated
    • 1
    • 0
    • 0
    • 1 image
    • 0 comments
    • 0 image comments
  3. Design Automation Updated

    Design automation helps you achieve up to 70% faster design cycles by reducing a day’s work to a few hours.
    Alpesh Patel
    Album created by by
    Alpesh Patel Updated
    • 2
    • 0
    • 0
    • 2 images
    • 0 comments
    • 0 image comments
  4. 3D CAD Modeling and Detailed Engineering Updated

    3D CAD modeling helps you in increasing design flexibility and improve the quality of the design and end product. Errors can be discovered and resolve easily during the early design development stage. It removes inefficiencies and establishes a streamlined workflow between design and fabrication needs for assemblies and sub-assemblies.
    Alpesh Patel
    Album created by by
    Alpesh Patel Updated
    • 5
    • 0
    • 2
    • 5 images
    • 0 comments
    • 2 image comments
  5. Design and Drafting Updated

    Alpesh Patel
    Album created by by
    Alpesh Patel Updated
    • 3
    • 0
    • 1
    • 3 images
    • 0 comments
    • 1 image comment
  6. Engineering CAD Services Updated

    Did you know, why sheet metal design services is drastically growing due to demands of manufacturing firms & metal fabrication sectors? Well, it's obvious causes why sheet metal design is so popular in various industries, due to benefits like customization, time & cost saving, DFM (Design for manufacturability), compatibility in product development process, and most important 3D models and flat CAD drawings. 
    Have a look here some good conceptual 3D Solid Models and drafting images.
    This gallery about Sheet Metal Fabrication Design, 2D CAD drawings & 3D models.
    cadoutsourcing
    Album created by by
    cadoutsourcing Updated
    • 6
    • 0
    • 1
    • 6 images
    • 0 comments
    • 1 image comment
  7. Plastic Welding Updated

    JC Machinery and Tools
    Album created by by
    JC Machinery and Tools Updated
    • 6
    • 0
    • 0
    • 6 images
    • 0 comments
    • 0 image comments
  8. Metal and BIMETAL Bush Bearing Updated

      Bimetal Bearing & Bushes, the name in bimetal industries spread over most of the industries in Coimbatore, had started its operations in 1999, and has its Office and Workshop in Chinnavedampatti. We are the leading manufacturer of metal bushes, bimetal bushes, phosphor bronze bushes and metal bearing bushes weighing upto 500 kg and has its applications in a variety of industries. The bushes which we manufacture finds its applications in the Automobile Industry, Tractor Industry, Tea Factories, Sugar Factories, Paper Mills, Submersible Pumps and for other allied industries and Heavy Machinery applications. Our series of products include Industrial Bushes, Gunmetal Bushes, Bronze Bushes, Metal Bushes and Bearing bushes and Gunmetal Flats, Gear Wheels etc., which are strong enough to operate in harsh conditions without any compromise. Our bimetal bushes are manufactured as per customer specifications and are provided in machined as well as pre-machined sizes as required. We take extra care so that these bushes serve the purpose well and provide longer life than normal.                                        We are committed to manufacturing and supplying high quality products that delight the customer through excellent performance and cost effectiveness. We strive to make our products with virgin raw material s, so that their durability cannot be questioned and  more over it can be customized in designs as per customer's requirements as told before.   * We manufacture bushes in bimetal that is steel backed with copper and any metal alloy over them or if you need just with single metal, that also can be done. * We employ strict quality control measures during production process and provide for process improvement. * We are more economical in bimetal prices, 30% less from market value. * We ensure timely delivery of our products.   * We provide excellent after sales services, by timely attending to customers call, and assist them with trouble shooting.   Our Contact Address is    Bimetal Bearing & Bushes, 69/1,   Athipalayam Road,   Coimbatore - 641006. Tamil Nadu.   Email Id is  bimetalbushes@gmail.com        Facebook : www.facebook.com/bimetalbushes          Twitter Handle : @bimetalbushes     Mobile : 9585892788(L SureshmohanKumar, Proprietor)  /  7418962872(K Narayanan, Admn)




    bimetalbushes@gmail.com
    Album created by by
    bimetalbushes@gmail.com Updated
    • 5
    • 0
    • 0
    • 5 images
    • 0 comments
    • 0 image comments
  9. rubber molded products Updated

    we are  in to mfrs&suppliers of rubber&plastic mold and molded products   as per customer drawing/specification/sample

    Nataraj Nataraj
    Album created by by
    Nataraj Nataraj Updated
    • 1
    • 0
    • 0
    • 1 image
    • 0 comments
    • 0 image comments
  10. Machining Zirconia Capabilities Updated

    Machining Zirconia Capabilities Product Images
    ArgeleIntili
    Album created by by
    ArgeleIntili Updated
    • 12
    • 0
    • 0
    • 12 images
    • 0 comments
    • 0 image comments
  11. 3D CAD libraries

    3D CAD library for Autodesk Inventor, Autocad, Solidworks and more.
    vn/sdDKNV/kdvGKLwheg'lhWL/
    Album created by by
    vn/sdDKNV/kdvGKLwheg'lhWL/
    • 0
    • 0
    • 0
    • 0 images
    • 0 comments
    • 0 image comments
  12. Autodesk Inventor CAD libraries

    Content Center libraries for Autodesk Inventor
    vn/sdDKNV/kdvGKLwheg'lhWL/
    Album created by by
    vn/sdDKNV/kdvGKLwheg'lhWL/
    • 0
    • 0
    • 0
    • 0 images
    • 0 comments
    • 0 image comments
  • Gallery Statistics

    2.8k
    Images
    554
    Comments
    209
    Albums


×
×
  • Create New...