EKO MARVIANDI Posted June 7, 2021 Report Share Posted June 7, 2021 Hi All, I am Eko from Indonesia, kindly need your help to assist me to provide good reference ( with completed case study ) for Shaft Design & analysis, Special case : Vertical Arrangement Fan COoler Shaft as per attached filed, Many Thanks if you mind to help me ASAP regards Eko M Quote Link to comment Share on other sites More sharing options...
DrD Posted June 7, 2021 Report Share Posted June 7, 2021 While this looks like a fairly simply problem on the surface, it has the potential to be quite complex. The fact that the shaft is vertical complicates the situation because it does not offer the stabilizing force of gravity. What you are asking for is professional work, well beyond the scope of the Q&A here at the ME Forum. You should contact a competent Professional Engineer for this assistance. You can send me a PM if you want further help. DrD Quote Link to comment Share on other sites More sharing options...
G B Reid MIMechE, SIMarEST Posted June 8, 2021 Report Share Posted June 8, 2021 I'd agree with DrD....that said, ball-bearings are inappropriate in this application....I'd use taper roller as it has both an axial and radial component of force, otherwise - due to the mass of air, mass of the assembly and the resultant action - you will have premature bearing failure! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.